top of page
Sand Rammer (VR) + Base Block (VRB)

Sand Rammer (VR) + Base Block (VRB)

Sand Rammer is the equipment which is used to prepare standard specimen of Green Sand as well as Silicate + CO2 Bonded sands (using appropriate attachments) 
Comes in two variants : 
AFS: 2" Dia X 2" Height Specimen preparation
Metric: 50 mm Dia X 50 mm Height Specimen preparation
Base Block, dampens vibrations and gives solid base for consistent specimen prepartion.

  • Tech Specs

    1.0 Product Information:  

    1.1 General Information 

    Sand Rammer is equipped with a lifting & ramming cam mechanism, calibrated sliding weight, Pedestal cup and standard specimen tube. To prepare the standard 50mm X 50mm specimen 

    With Help of attachment it can also measure 

    • Compactibility (Refer 4.2.1) 

    • Flowability (Refer 4.2.2) 

    1.2 General Usage 

    Sand Rammer is used to prepare the standard specimen under identical conditions for checking important physical properties of foundry sand. 

    1.3 Product Data 

    Product Name: 

    Sand Rammer 

    Product Code: 

    VR 

    Order Reference Code: 

    V0000001 

    Electrical Supply Required: 

    Not Required 

    Electrical Plug: 

    Not Applicable  

    Typical Maximum Current: 

    Not Applicable 

    Compressed air Supply: 

    Not Required 

    Communication: 

    Not Applicable 

    Dimensions: 

    245 X 225 X 560 mm (WXBXH) 

    Packing Dimensions: 

    400 mmx 400mm x 685 mm (WXBXH) Typical 

    Net Weight:  

    Approximately 22 kg 

    Gross Weight: 

    Approximately 27 kg 

    Colour: 

    Factory Default 

    Measuring Range: 

    50 mm Specimen 

    Traceable to:  

    NABL Standards 

    Least Count: 

    1 mm 

    Specimen Requirements: 

    Not Required 

    Operating Temperature: 

    0-500C 

    Testing Standards: 

    BIS: Standard 

    AFS: Optional 

    Calibration Frequency: 

    22500 nos. of Testing Cycles or Once in Year 

     

    2.0 Scope of Supply 

    2.1 Inclusions in Supply Scope 

    • Sand Rammer. 

    • Standard Specimen Tube.  

    • Pedestal Cup. 

    • Stripper. 

    • Calibration certificate. 

    • Instruction manual. 

     

    2.2 Exclusions in Supply Scope 

    • Anything that is not covered under Supply scope. 

     

    3.0 Recommended Pre-requisite Equipment  

    Sand Splitter : To get representative sample  

    Tube Filler Accessory VTF  

    Rammer Base Block VRB 

    Weighing Balance (LC 10mg) 

    4.0 Accessories 

    4.1 Calibration Kits 

    There are two types of calibration kits to choose from: 

    VKRA: With Std. Specimen Tube Type 

    VKRB: With Impact Ring Type 

    4.2 Attachments 

    Compactibility Tester VCT  

    Flowability Meter VF 

     

    5.0 Alternative Equipment 

    Sand Squeezer VCC  

    Digital Compactibility Tester VCCD 

    6.0 Installations Instructions 

    Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration) Other Installation instruction shall be provided along with the equipment. 

    7.0 Consumables 

    NA. 

    8.0 Hazards 

    No Major Hazards. 

    9.0 Additional Information 

    Link to Web-Page   

     

    Disclaimer: Specifications and design of equipment may change without prior notice. 

bottom of page