top of page
Digital Permeability Meter VPD

Digital Permeability Meter VPD

 

  • 1.1 General information

    This is a precision equipment to measure Permeability of Foundry Sands. By default it can measure absolute permeability of an AFS (Dia. 2ā€X2ā€) or Metric (Dia. 50mmX50mm) Specimen.

    With Help of attachment it can also measure

    • Relative Permeability of Moulds (Refer 4.2.1)
    • Absolute Permeability of Cores (Refer 4.2.2)
    • Absolute Permeability of Un-bonded sand (Refer 4.2.3).

  • 1.2 General Usage

    Specimen held in a Tube or accessory is placed on the measuring Rubber Boss. Start the test cycle & get the Permeability reading.

  • 1.3 Product Data

    Product Name:

    Digital Permeability Meter

    Product Code:

    VPD

    Order Reference Code:

    V9000792

    Electrical Supply Required:

    230v 50Hz A.C. (Default)

    110v 60 Hz A.C (Optional)

    Single Phase, Stabilized with Over/ Under Voltage cut-off.

    Electrical Plug:

    M type : 15 Amp Plug

    Typical Maximum Current:

    2.2 A at 230V

    Compressed air Supply:

    Not Required

    Communication:
    • RS485 MODBUS RTU
    • RS232 Serial
    • Ethernet (Optional)
    • CloudSync using V-Sync

    Dimensions:

    500 X 320 X 460 mm (WXBXH)

    Packing Dimensions:

    600 mmx 450mm x 625 mm (WXBXH) Typical

    Net Weight:

    Approximately 25 kg

    Gross Weight:

    Approximately 30 kg

    Colour:

    Factory Default

    Measuring Range:

    0-100 mmWC and Related readings AFS Permeability measurement chart digitally displayed.

    Traceable to:

    Manufacturers Standards

    Least Count:

    1 mmWC

    Specimen Requirements:

    Compression type specimen

    Operating Temperature:

    0-50 degrees Celsius

    Testing Standards:

    BIS: Standard

    AFS: Optional

    Calibration Frequency:

    22500 nos. of Testing Cycles or Once in Year

  • 2.1 Scope of supply

    • Digital Permeability Meter.
    • Large Orifice.
    • Syphon Pump.
    • Calibration certificate.
    • Instruction manual.

  • 3.1 Recommended pre-requisite equipment

    Sand Splitter : To get representative sample

    Specimen preparation equipment to make a standard AFS or Metric Compression specimen.

  • 4.1 Recommended Calibration kits

    There are four types of calibration kits to choose from:

    VKPA: With Std. Specimen type for Small Orifice

    VKPB: With Std. Specimen type for Large Orifice

    VKPC: With Rubber Boss type for Small Orifice

    VKPD: With Rubber Boss type for Large Orifice

  • 4.2 Recommended attachments

    • VPR: Mould Perm Tester
    • VD: Core Permeability Tube
    • VBP: Base Permeability Tube
    • Small Orifice

  • 4.3 Alternative equipment

    • Permeability Meter VP (For Educational Purposes)
    • Electropermeability Meter VEP
    • VCAT Multi Tester
    • Digital Permeability Meter VPD I
    • Digital Permeability Meter VPD II

  • 5.1 Consumables

    • Demineralized Water
    • Rubber Boss Assembly (Part # V4500259)
bottom of page