top of page
Mouldability Friability Tester VMT

Mouldability Friability Tester VMT


  • 1.1 General information

    Mouldability Friability Tester is equipped with a sieving mechanism, heating mechanism with infrared lamp, timer kit for cycle time, selector toggle switch & push to on switch.

  • 1.2 General Usage

    The Mouldability Friability Tester is used to determine the mouldability index of the green sand & friability index of the green sand standard specimens.

  • 1.3 Product Data

    Product Name:

    Mouldability Friability Tester

    Product Code:


    Order Reference Code:


    Electrical Supply Required:

    230v 50Hz A.C. (Default)

    110v 60 Hz A.C (Optional)

    Single Phase, Stabilized with Over/ Under Voltage cut-off.

    Electrical Plug:

    M type : 15 Amp Plug

    Typical Maximum Current:

    1.2 A at 230V

    Compressed air Supply:

    Not Required


    Not applicable


    450x450x785 mm (WXBXH)

    Packing Dimensions:

    800x400x690 mm (WXBXH) Typical

    Net Weight:

    Approximately 17 kg

    Gross Weight:

    Approximately 23 kg


    Factory Default

    Measuring Range:

    200 Grams sand or 02 nos. of specimen

    Traceable to:

    Manufacturers Standards

    Least Count:

    Not Applicable.

    Specimen Requirements:

    Compression type specimen

    Operating Temperature:

    0-50 degree Celsius

    Testing Standards:

    BIS: Standard

    AFS: Optional

    Calibration Frequency:

    15500 nos. of Testing Cycles or Once in Year

  • 2.1 Scope of supply

    • Mouldability Friability Tester.
    • Sample tray.
    • Infrared lamp.
    • Working condition certificate.
    • Instruction manual.
  • 3.1 Recommended pre-requisite equipment

    Sand Splitter : To get representative sample

    Specimen preparation equipment to make a standard AFS or Metric Compression specimen.

  • 4.1 Recommended Calibration kits


  • 4.2 Recommended attachments


  • 4.3 Alternative equipment


  • 5.1 Consumables


bottom of page